checking in...and a NEW universal Audi muffler...

[Dave Hord]

Quoting Steve Marinello <smarinello at telocity.com>:
>what are the dimensions and what
> inlet/outlet sizes are to be offered?

Ah ha! Right!  Dimensions...

Current dimensions are slated to be:

11.5" wide, 15" long and 5" high.

Inlet and Outlet diameters are 2.5"

The dimensions were created using both the 90q and 4000q stock muffler designs.
Obviously I increased the Inlet and outlet to 2.5"

These dimensions are not written in stone (yet)...and I'm interested to have
any feedback the list might have.

-Dave


> >
> > What I have created, however, is what we're calling the "eurofit"
> universal
> > muffler.  I took the Audi 80/90/4000q rear muffler design, and produced a
> > stainless steel version of it. The muffler is designed to sit sideways
> between
> > the rear diff and the rear bumper. The inlet is on the side of the can,
> while
> > the outlet is on the end of the can.  This means that NOW us Audi guys
> can
> > build custom exhaust systems for our cars without having to do the
> traditional
> > combination of 90 and 180 degree bends into the rear muffler.
> >