Bosch connector boots and hose questions..

[gerard]

Hi!

Anyone know a source for these little rubber boots that fit Bosch
connectors as shown in this photo?

http://www.2226.co.za/electrical-bosch-connector-boot-001.jpg

Or any other boot for Bosch connectors, but just looking for a cheap
source at the moment.

The other question is regarding coolants hoses, especially the lower
coolant hose on the Audi 5kt/200. Here's a picture of the victim:

http://www.2226.co.za/cooling-lower-hose-001.jpg
http://www.2226.co.za/cooling-lower-hose-002.jpg

Since my 200 is my pet project I would really like to give it a whole
new load of silicone hoses, so does anyone know a good silicone
replacement for this little hose? My first stop would be the generic
180-degree bend hoses from SAMCO 'cos I could get a quality hose in a
colour of my choice. However, this little hose has got quite a kink in
it so I'd like to know what other folks might have done. Looks like a
small combination of 180-degree bend hooked up to a 45-degree. :)

Better yet, where can I get some corrugated or convoluted flexible (but
reinforced) silicone hose that could bend to this shape?

And, yes, I know using an OE replacement would be just perfect, but a
pet is a pet and must be spoilt. :)

Thanks.

G.