Bosch connector boots and hose questions..

[Mihnea Cotet]

Hey Gerard!


here's a Bosch PN for a rubber boot, dunno if it's the exact one that you
need nor if it will fit though.. 1 280 703 031



HTH,

Mihnea

At 19:00 27/10/2002 +0200, gerard wrote:
>Hi!
>
>Anyone know a source for these little rubber boots that fit Bosch
>connectors as shown in this photo?
>
>http://www.2226.co.za/electrical-bosch-connector-boot-001.jpg
>
>Or any other boot for Bosch connectors, but just looking for a cheap
>source at the moment.
>
>The other question is regarding coolants hoses, especially the lower
>coolant hose on the Audi 5kt/200. Here's a picture of the victim:
>
>http://www.2226.co.za/cooling-lower-hose-001.jpg
>http://www.2226.co.za/cooling-lower-hose-002.jpg
>
>Since my 200 is my pet project I would really like to give it a whole
>new load of silicone hoses, so does anyone know a good silicone
>replacement for this little hose? My first stop would be the generic
>180-degree bend hoses from SAMCO 'cos I could get a quality hose in a
>colour of my choice. However, this little hose has got quite a kink in
>it so I'd like to know what other folks might have done. Looks like a
>small combination of 180-degree bend hooked up to a 45-degree. :)
>
>Better yet, where can I get some corrugated or convoluted flexible (but
>reinforced) silicone hose that could bend to this shape?
>
>And, yes, I know using an OE replacement would be just perfect, but a
>pet is a pet and must be spoilt. :)
>
>Thanks.
>
>G.