Euro Light Install in 80Q
Greg Galinsky
nokian at msn.com
Tue Sep 3 21:29:04 EDT 2002
Just installing lights on a 1990 80 and there is a 3rd screw on the bottom
going into a plastic clip that helps retain the
narrow 1" wide strip that goes under the grille and headlights. The center
screw is that retainer.
Once that bootom filler strip is removed the lights come out with a little
twisting
Greg
lots of type 89's
----- Original Message -----
From: "David Miller" <millerds at muohio.edu>
To: "Quattro List" <quattro at audifans.com>
Sent: Tuesday, September 03, 2002 3:32 PM
Subject: Euro Light Install in 80Q
> I'm trying to install some regular Euro lights in my '90 80Qthat I bought
> recently and have run into a problem removing the old lights. I've
removed
> the 4 screws but can't seem to be able to get the light itself out of the
> front of the car. There seems to be some mount in between the light and
> turn signal on the bottom that is preventing it from coming out. The
light
> itself is still in the plastic harness, and the Bentley is of no help (it
> simply says "remove the light").
>
> Thanks,
> David Miller
>
>
More information about the quattro
mailing list