Connecting Ross-Tech "Ugly cablle" to 1990 200

[Rich Assarabowski]

Scott Mockry has updated his Web site regarding connecting the VAG-COM
to the 1990 200.  See http://www.sjmautotechnik.com/ecuf.html#fctwo.  In
the 1990 which uses the 3x2 connector, the brown connector is the same
function as the white connector in the later 2x2 configuration (the blue
is unused). Also thanks to Andy Smith from Ross-Tech for confirming.

-- Rich A.

>Can someone tell me how to connect the Ross-Tech "Ugly cable" to the
>1990 Audi 200 (which >has the 3x2 diagnostic connectors as shown in
>http://www.sjmautotechnik.com/VAS5051.htm).
>According to Scott Mockry, only the black and blue connectors are used
to connect to the
>VAG-COM. The black connector is used for +12V and ground (which would
>connect to the red >and black pins on the Ugly cable, respectively).
>
>How does the blue and yellow pin on the Ugly cable connect to the brown

>connector of the >car??
>
>-- Rich A.
>  '90 200q
>  '93 S4
> '83 Coupe GT