FW: subframe mount bolts

[Livolsi, Stephane]

SJM site mentions that the 4 subframe bolts are stretch type and should
always be replaced.

...walking delicately out on the ice, so as not to offend.....

I haven't found any other reference to these being stretch bolts.  Does this
apply to all models, or only some models...
I need to know as well because I just got all new subframe bushings, tranny
and engine mounts.

...stepping carefully off the ice...... BTW I think SJM's site is awesome
and has saved me many hours of frustration and often pointed me in the right
direction when diagnosing problems.

Stephane

> ----------
> From: 	james accordino[SMTP:ssgacc at yahoo.com]
> Sent: 	April 1, 2003 3:27 PM
> To: 	Calvin Krug
> Cc: 	audi list
> Subject: 	Re: subframe mount bolts
>
> Size is M12 x 1.5  Length is 98mm with 44mm of that
> threaded.  Fully threaded should be fine.  Also
> alittle shorter or longer should work as well.  P/N is
> N 902 742 02 according to the family pics.  Get them
> at a breakers or pick-n-pull.
>
> Jim Accordino
>
> --- Calvin Krug <ckrug at tctc.com> wrote:
> > help!  My '89 100 just developed a nasty looseness
> > in the front end,
> > and when I looked underneath, the rear subframe
> > mount bolts were
> > GONE.  Anyone know what size the bolts are, so I can
> > at least hold it
> > together until I can get the correct hardware
> > ordered?
> >
> > thanks,
> >
> > Calvin K.
> > --
> > this message created using 100% recycled electrons
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Tax Center - File online, calculators, forms, and more
> http://platinum.yahoo.com
>