$800 carte blanche

Cat ^. .^ ~ iceisit at earthlink.net
Fri Aug 1 12:09:13 EDT 2003


Robert Myers wrote:

>>Robert Myers wrote:
>>
>>>I don't know for sure which hose you are speaking of or the exact cause of the problem but if it's just a blown hose then just about any decent heavy equipment hydraulics shop should be able to rebuild your hose reusing the original fittings for well under $50.  Some Audi hoses have an internal restrictor which might be needed for the rebuild.  Careful dissection of the old hose should provide both the information and the part.
>>
>>Great idea !!!
>>
>>Now we bought an after-market contraption with the fitting . . . . so should we get a *real* Audi one first and do that if there is a problem, or try to salvage this aftermarket one ?

>Did the aftermarket one work OK before it burst?

It worked for about 8 months, and then for a while I had symptoms of not having enough power assist to both brakes and power steering . . . .

>No unusual groaning noises, etc.?  If so I'd look into rebuilding it.  If not then a new OEM ho$e might be in order - unless you still happen to have the carcass from the OEM hose.
>
>Good luck.

We are going to be moving to AZ as soon as we can get organized to leave.    It doesn't have to be the most expensive,  but I would hope to keep it going for a while . . . .

Thanks ~


Cheers,  Fay

'89 Audi 200 Turbo Automatic (No Q)
'88 5000
'87 5000

http://www.webspawner.com/users/fayskelley/
"Enjoy the edge you are on . . . don't think about the one to come!"  





More information about the quattro mailing list