just to check some prices

JShadzi at aol.com JShadzi at aol.com
Wed Aug 6 10:49:57 EDT 2003


--
[ Picked text/plain from multipart/alternative ]
The NG uses a 20mm wrist pin as does the JT and other NA 2.2's, the turbo
rods are beefier at 22mm and are not compatible with the NG pistons as the MC
uses a shorter rod as well, 136 vs 144mm for NA and 20v.

Javad

In a message dated 8/6/2003 1:09:35 AM Pacific Standard Time, chris at maimex.bg
writes:

> 10x Paul,
> Yesterday I found a set of used NG pistons for about $115.
> Can some confirm that diametar of NG wrist pin is identical to diameter of
> wrist pin of my 2.2, so I can use my old set of connection rods and pins.
> Is this conclusion true - if my engine is 10:1CR, and NG is 10:1 so distance
> between center of wrist pin hole and top of the piston is same.
>
> regards,
> Christo




More information about the quattro mailing list