5kt oil cooler on CGT?

[Alan Pritchard]

this is what i have done (but not fitted).
i bought an oil filter adaptor for a urq, you also need the stud which goes
into the engine block, its longer. the adaptor fits over the new stud and
nuts down, then you fit the 2 oil filters, one over the remainder of the
stud, one on the other part of the adaptor. i cant remember exactly, but i
think there is two lines coming off the adaptor, i think one goes to the
turbo, and one to the cooler. i dont know the complete circuit.  there is a
drain pipe that comes from the turbo to the bottom of the block. if you look
on your cgt you eill see a boss, a few inches from the front of the block,
it has 2 tappes holes, inbetween these holes you will have to drill a hole
for the return i think. someone will have to confirm the circuit for you cos
i havent looked at the adaptor for 6 months now!!!
hopw this helps a bit.

-----Original Message-----
From: Jeroen Bruintjes [mailto:brun at bart.nl]
Sent: 12 August 2003 14:42
To: quattro at audifans.com
Subject: 5kt oil cooler on CGT?


A simple question: does the oil cooler from a 100/5000/urq turbo
engine fit a CGT? Of course it's easy to fit the cooler and the
lines, but I wonder how it connects to the engine. Does it fit where
the oil filter normally sits? And does it have a thermostat? Thanks!

--
Brun uit/uut/aus/from/de Amsterdam.
Met een dakje op de u!
brun at bart.nl
--