Cold start valve (MAC-12D)
Mike_Buckham at ptk.pioneer.co.uk
Mike_Buckham at ptk.pioneer.co.uk
Thu Dec 4 10:12:26 EST 2003
Thanks, Mihnea. That's useful information. I have to correct you on one
thing, though. Our UK engines are also limited to 1.4 Bar or 1.5 under
temporary extra boost as standard. At least my 1B engine is, anyway.
Mike.
Mihnea Cotet
<mik at info.fund To: Mike_Buckham at ptk.pioneer.co.uk, quattro at audifans.com
p.ac.be> cc: Ben Swann <benswann at comcast.net>
Subject: Re: Cold start valve (MAC-12D)
04/12/2003
15:03
MB and 1B are nearly the same, except for the intercooler that's different
due to the impossibility to fit it behind the front grill on the Urq, the
MC-1 has 7.8:1 CR compared to 8.4:1 on the MB/1B. All 3 have only 1 knock
sensor IIRC. Boost is lower on the MC (about 1.4 Bar absolute IIRC and
1.7-1.8 on the MB/1B, IIRC again) and that's about it...
HTH,
Mihnea
At 14:53 4/12/2003 +0000, Mike_Buckham at ptk.pioneer.co.uk wrote:
>Hi Ben,
>
>If someone could tell me the differences between the 1B, MB and MC-1 then
>I'd be very interested.
This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual to whom they are addressed.
If you have received this e-mail in error please notify your system manager.
Please note that any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company.
Finally, the recipient should check this e-mail and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this e-mail.
More information about the quattro
mailing list