Brake hard line parts

[Richard Hoffman]

Hello All!

I am relocating some parts around my engine bay and I need to make my own
hard lines from the master cylinder to the ABS controller and such.  Places
like Jegs and Summit have the line, but only with SAE fittings.  I can
borrow a bender and flare tool from a friend.  The line needs to be 3/16"
and the fittings M10x1.0mm.  I suppose if I HAD to I could use M10x1.0
to -3AN adaptors and use flexible SS line, but thats really expensive
compared to a 25 foot roll of tubing for $28.

Any leads are appreciated!
Richard