Brake hard line parts

[Kneale Brownson]

Local flaps has several lengths of brake line (up to something like 5 feet
long) with the correct threaded ends to connect to the other brake parts on
my Audi.  I had to cut off one end and flare it as well as flaring the
remaining OEM line) in order to splice into the car's brake line using an
SAE connector.

At 01:19 AM 12/19/2003 -0800, Richard Hoffman wrote:
>Hello All!
>
>I am relocating some parts around my engine bay and I need to make my own
>hard lines from the master cylinder to the ABS controller and such.  Places
>like Jegs and Summit have the line, but only with SAE fittings.  I can
>borrow a bender and flare tool from a friend.  The line needs to be 3/16"
>and the fittings M10x1.0mm.  I suppose if I HAD to I could use M10x1.0
>to -3AN adaptors and use flexible SS line, but thats really expensive
>compared to a 25 foot roll of tubing for $28.
>
>Any leads are appreciated!
>Richard
>_______________________________________________
>quattro mailing list
>quattro at audifans.com
>http://www.audifans.com/mailman/listinfo/quattro