Brake hard line parts

[Todd Young]

I just went to my local FLAPS and found what I needed.

Richard Hoffman wrote:
> Hello All!
> 
> I am relocating some parts around my engine bay and I need to make my own
> hard lines from the master cylinder to the ABS controller and such.  Places
> like Jegs and Summit have the line, but only with SAE fittings.  I can
> borrow a bender and flare tool from a friend.  The line needs to be 3/16"
> and the fittings M10x1.0mm.  I suppose if I HAD to I could use M10x1.0
> to -3AN adaptors and use flexible SS line, but thats really expensive
> compared to a 25 foot roll of tubing for $28.
> 
> Any leads are appreciated!
> Richard


-- 
Todd Young
7079 Dawn Ave. E.
Inver Grove Heights, MN 55076