Brake hard line parts

Richard Hoffman billzcat1 at hotmail.com
Fri Dec 19 15:53:25 EST 2003


Pardon my ignorance...but does FLAPS stand for: "Friendly Local Auto Parts
Store"?
Thanks! :)
Richard
----- Original Message ----- 
From: "Todd Young" <auditodd at comcast.net>
To: "Richard Hoffman" <billzcat1 at hotmail.com>
Cc: <quattro at audifans.com>
Sent: Friday, December 19, 2003 7:14 AM
Subject: Re: Brake hard line parts


> I just went to my local FLAPS and found what I needed.
>
> Richard Hoffman wrote:
> > Hello All!
> >
> > I am relocating some parts around my engine bay and I need to make my
own
> > hard lines from the master cylinder to the ABS controller and such.
Places
> > like Jegs and Summit have the line, but only with SAE fittings.  I can
> > borrow a bender and flare tool from a friend.  The line needs to be
3/16"
> > and the fittings M10x1.0mm.  I suppose if I HAD to I could use M10x1.0
> > to -3AN adaptors and use flexible SS line, but thats really expensive
> > compared to a 25 foot roll of tubing for $28.
> >
> > Any leads are appreciated!
> > Richard
>
>
> -- 
> Todd Young
> 7079 Dawn Ave. E.
> Inver Grove Heights, MN 55076
>
>


More information about the quattro mailing list