4kq propshaft u-joint part number?

[rizov_d at shaw.ca]

[ Converted text/html to text/plain ]



Have  you expirienced almost welded bolts at the CV flanges at drive shaft?

(What is the way to deal with hard to open bolts at both ends of the propeller
shaft?)

They are fixed with locktite or similar!



Dobby

86 4kq

--- Original Message -----

From: tihol_tiholov at sd27.bc.ca

Date: Monday, February 3, 2003 12:10 pm

Subject: Re: 4kq propshaft u-joint part number?

>
> >Date: Sun, 2 Feb 2003 21:36:37 -0500
> > ... In my recent archive search for 4kq center support /bearing
> posts, I
> >came across a post that mentioned a FAG part number for the u-joint.
>
> No BTDT, just what I have from past posts, edited:
>
> "4000/80/90 Drive shaft carrier bearing BMW #26-12-1-209-532
> (includes bearing, bracket, rubber)
> Brendan Rudack <rudack at ucsub.Colorado.EDU>
> With the help of Steve B. Bruce B. and Graydon S. my 90Q is
> running again with about $50 dollars of parts. I rebuilt my center
> drive-shaft (carrier bearing and u-joint only). The bearing was
> gottenthrough GPR and is BMW part# 26121209532. It is the bearing
> including the
> rubber surround and the mounting bracket as one piece, total cost
> $35."
> Greetings,
> Tihol
>
>
>