A80/90 Propeller Shaft CV-joint

[Bhatti, Mohammed]

You mean just the CV joint right?  Funny you ask since I started doing this
last night on my 88 80q (drivers side outer).

Yes you can.  I got a pretty decent CV joint from Chris at Froce5 Auto.
I've taken the old joint off.  Cleaned the new (used) one with de-greaser,
packed it with grease and have the joint back on the drive shaft.

I did not need to take the shaft off the car.  I was able to do the whole
procedure while the shaft was on the car.

Anyway, I'm not done yet since I messed up the small tightening ring.  I'll
be visiting the local parts and Audi/VW stores to find this thing.

hth

mohammed
88 80q

>>>>>>>>>>>>>>>>>>>>>>>>>
Message: 12
Date: Thu, 09 Jan 2003 21:26:47 -0500
From: Igor Kessel <igor at s-cars.org>
To: Audi Q-list <quattro at audifans.com>
Subject: A80/90 Propeller Shaft CV-joint

Folks,
is it possible to replace just the the Propeller Shaft CV-joint on those
cars? I think it is made by Lobro and I vaguely recall somebody posting
the info on that. Does anyone have the p/n and the source?

Thanks in advance.
--
Igor Kessel
two turbo quattros
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<