thermo-time switch location 90 200tq

[Ti Kan]

Ron Wainwright writes:
>   Is there another name for this switch? Cause I can't
> find out where it's located, and I've checked SJM's
> web site found every reference to other sensors,
> senders, & switchs but not thermo-time switch ,
>  and the Bentley, which shows it on page 25.2 but
> there's no definate location that I can see.

There is no thermo-time switch on the type 44 CIS turbos.  The cold start
valve on these cars is ECU-activated and the ECU gets its coolant
temp info via a coolant temp sender.  I believe it's screwed into
the engine, near the top radiator hose flange, or possibly on the back
of the engine.  It is grounded through the engine, and only has a
single wire attached to it.

-Ti
2003 A4 1.8T multitronic
2001 S4 biturbo 6-sp
1984 5000S turbo
1980 4000 2.0 5-sp
--
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Laboratories, Sunnyvale, CA. USA
  ///    ti at amb.org
 //////  http://www.amb.org/ti/
///