Replacement seal for the rear caliper emergency brake mechanism

Peter Schulz peschulz at cisco.com
Wed Jul 9 09:55:37 EDT 2003


>Date: Wed, 09 Jul 2003 08:49:21 -0400
>To: 200q20v <200q20v at audifans.com>, 20v <audi20v at rennlist.org>, s2-Editor at S-Cars.org, s-car-list at audifans.com
>From: Peter Schulz <peschulz at cisco.com>
>Subject: Replacement seal for the rear caliper emergency brake mechanism
>
>Folks:
>
>Thanks to the efforts of Mike Sylvester, I have in my hand a seal that can replaced the emergency brake mechanism seal on the Girling rear calipers. As Frank Amoroso and others have posted in the past, the seal is manufactured by Chicago Rawhide.
>
>It's a rear output transmission oil seal (similar to the engine crank seal, but much smaller) part number CR 16x24x7 HMS4 R
>
>If you have a NAPA automotive parts store nearby, you can order it using NAPA part number 6405:
>http://www.napaonline.com/cgi-bin/ncommerce3/ExecMacro/NAPAonline/search_results_part_num.d2w/report?Search_Part=NO&ic_exact=YES&part_number=CR%2016X24X7
>
>NAPA's price is $2.99 per seal.
>
>I hope that those of you that are pondering rebuilding your rear calipers find this helpful.
>
>-Peter

Peter Schulz
1990 CQ (awaiting S2 3b engine transplant)
1991 200 20v TQW indigo mica
1991 200 20v TQW titanium grey
Chelmsford, MA USA
peschulz at cisco.com




More information about the quattro mailing list