multifunction temp sensor

[Ti Kan]

Michael S. Williams writes:
> hey all, i have a question.  i just got my multifunction temp sensor
> from rod at the parts connection, and it's the correct pn for the 4
> pin one (well, on the bag it came in it is), 034 919 369C....  only
> problem is that it only has three pins, not four... it IS brown
> though...  the actual sensor has no markings at all, except "200.01"
> '8/1" and  the pins are labeled 't' 'r' and 'c'....
>
> is this a usable one for the MC'd urq?  i dont think so, but i dunno
> if maybe this sensor is for a non a/c car (which wouldnt be a big
> deal since my car has the AC deleted...)...

The three-pin unit is a direct replacement for the four-pin.
On the four-pin sensor, one of the pins is a power connection for
its innards, but on the 3-pin the sensor is all mechanical and
does not need this connection.

See this link for details:
    http://www.sjmautotechnik.com/cooling.html#gauge

-Ti
2003 A4 1.8T multitronic
2001 S4 biturbo 6-sp
1984 5000S turbo
1980 4000 2.0 5-sp
--
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Laboratories, Sunnyvale, CA. USA
  ///    ti at amb.org
 //////  http://www.amb.org/ti/
///