[urq] multifunction temp sensor

[Martin Pajak]

Michael,

MC Ur-q does not need the multifunction switch unless you have the after-run
coolant pump stuff installed as well.
The 5kt uses it for the temp gauge and afterrun coolant pump.
MAC11 needs the single pin sensor on the cylinder head by #1 spark plug.

HTH
Martin Pajak

http://www.quattro.ca

1983 Audi Ur-quattro (289,000 km) Canadian spec. winter car
1985 Audi Ur-quattro (166,000 km) Euro spec. import ;o)


> -----Original Message-----
> From: urq-admin at audifans.com [mailto:urq-admin at audifans.com]On Behalf Of
> Michael S. Williams
> Sent: July 9, 2003 22:30
> To: urq at audifans.com; quattro at audifans.com
> Subject: [urq] multifunction temp sensor
>
>
> hey all, i have a question.  i just got my multifunction temp sensor
> from rod at the parts connection, and it's the correct pn for the 4
> pin one (well, on the bag it came in it is), 034 919 369C....  only
> problem is that it only has three pins, not four... it IS brown
> though...  the actual sensor has no markings at all, except "200.01"
> '8/1" and  the pins are labeled 't' 'r' and 'c'....
>
> is this a usable one for the MC'd urq?  i dont think so, but i dunno
> if maybe this sensor is for a non a/c car (which wouldnt be a big
> deal since my car has the AC deleted...)...
>
> anyway, thanks in advance...
>
> later
> --
> MswmSwmsW
>
>      <<<->>>=<<<->>>=<<<->>>=<<<->>>=<<<->>>=<<<->>>=<<<->>>
> The solution is obvious.  We all have to become dumber. -Jon Rappoport
>
> So crucify the ego, before it's far too late
> To leave behind this place so negative and blind and cynical,
> And you will come to find that we are all one mind
> Capable of all that's imagined and all conceivable. - TooL, Reflection
>       <<<->>>=<<<->>>=<<<->>>=<<<->>>=<<<->>>=<<<->>>=<<<->>>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>