90q clicking rearend

[no1of consequence]

thanks huw. i'll yank on it when i get it up on stands [left my jackstands
at the old place].

by the way, is it not a good idea to jack the car in the centeron the
subframe support in the rear? it would be a lot faster than doing it 1
corner at a time..

good news is no leaks from the diff [a little wet-ish, but not dripping].

thanks again,
jim

>From: Huw Powell <audi at humanspeakers.com>
>Reply-To: audi at humanspeakers.com
>To: no1of consequence <iin10ded at hotmail.com>
>CC: quattro at audifans.com
>Subject: Re: 90q clicking rearend
>Date: Thu, 10 Jul 2003 01:19:22 -0400
>
>
>>before i put the car up tonight and listen for the noise it's making i
>>thought i would ask if anyone had any tips for checking the driveshaft
>>u-joints [my current suspect].
>
>You can often tell by grabbing the shaft in question and yanking it against
>the axial direction, ie, up and down, side to side.  Bad joints will
>usually show up by having some play.  Or a lot of play...
>
>--
>Huw Powell
>
>http://www.humanspeakers.com/audi
>
>http://www.humanthoughts.org/
>

_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/featuredemail