Removing the back lights on an 87 4kq

[james accordino]

You'll need an 8mm socket.  Look on the back of the
trunk.  There are nuts on studs that hold it on.  Get
ALL of them.  It's also held on/sealed with rope
caulk.  Tar based, it's what they used to install
windsheilds in the olden days.  Still available and
cheap.  Rope caulk from Home Depot or such would work
in a pinch.

Jim Accordino

--- Cade Carvell <ccarvell at nbsusa.com> wrote:
> Hello,
>   I need to do some repair on my rear trunk
> lid...The bottom edge got
> bent down in an accident.  Anyway, how do I remove
> the tail light
> assemblies that are attached to the trunk lid area?
> It appears to be
> some screws, but I am not sure.  I looked through
> bently, and I must
> have missed that section...Can anyone point me in
> the right direction?
>
> Thanks,
>
>
> Cade Carvell
> National Business Systems, Inc.
> 2919 West Service Road
> Eagan, MN 55121
> Office: 651-994-4400
>
>
> This message (including any attachments) contains
> confidential
> information intended for a specific individual and
> purpose,
> and is protected by law.  If you are not the
> intended recipient,
> you should delete this message and are hereby
> notified that any
> disclosure,copying, or distribution of this message,
> or the taking
> of any action based on it, is strictly prohibited.
>


__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com