source for high temp hose insulation

[JShadzi at aol.com]

www.amstreetrod.com

Javad

>Due to PITAness of routing A/C low pressure hose through the hole under
>air box
>I routed it through the opening for water drain under the accumaulator
>(receiver/dryer).
>As result the hose is as close as  4-5 inches  from the downpipe and
>close to engine (over tranny bell and down to compressor).
>I was not able to find any suitable insulation in FLAPS or maybe I
>should've somethig very specific.
>Can someone recommend  insulation  and its source for the hose?
>It is prettry tight space there, so the more convinient to put it on the
>better.
>
>Thank you.
>Konstantin
>
>