[urq] '83 UrQuattro - Now CIS Potential

[Huw Powell]

and all I was suggesting was swapping in a rear light harness from a
dead cgt...!

> MC-1 Engine rebuilt incl. following -
> 	T03/K26 hybrid turbo.
> 	Elgin 260i254e cam
> 	adjustable cam sprocket - set for 0 tested both advanced and
> retarded and worked as expected.
> 	new valve seals, lifters & techtonics springs
> 	new piston rings, connecting rod and main bearings, all new
> seals.
> 	2-Piece Exhaust manifold, highflow cat and 2.5" Stebro exhaust.
> 	All visible casting flash removed from components.
> 	Mild port and polish to head and manifolds with ports matched.
> 	Bypass valve located in intercooler where untapped hole was
> with bypass
> 	flow directed toward turbo
> 	Supplementary fuel injector installed in intercooler controlled
> by 034EFI
>  - injector is inline just prior to throttle body hose.
> 	200 Flywheel, Clutch and Pressure plate, slave cyl.
> 	QLCC chip with variable resistor modded ECU, Schrapnel Knob + 2
> bar SJM
> 	spring for control – currently set for 16 PSI.

--
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/