WANTED: TYPE44 EURO FRONT LISCENCE PLATE MOUNT

[DeWitt Harrison]

Ah. Therein lies Chris' solution perhaps. How where the
two different plate dimensions accommodated in this model?

DeWitt Harrison

----- Original Message -----
From: "Tom Nestor" <tnestor1 at fcgnetworks.net>
To: "DeWitt Harrison" <Six-Rs at attbi.com>; <JordanVw at aol.com>
Cc: "Quattro List" <quattro at audifans.com>
Sent: Saturday, June 21, 2003 11:40 AM
Subject: Re: WANTED: TYPE44 EURO FRONT LISCENCE PLATE MOUNT


> I believe you will find the one exception to that is the 200 20v
> turbo......same front bumper on both sides of the pond to accomodate the
> large tubing to the inlet side of the single pass intercooler.
>
> Tom Nestor
>
>
> From: "DeWitt Harrison" <Six-Rs at attbi.com>
> To: <JordanVw at aol.com>
> Cc: "Quattro List" <quattro at audifans.com>
> Sent: Saturday, June 21, 2003 1:29 PM
> Subject: Re: WANTED: TYPE44 EURO FRONT LISCENCE PLATE MOUNT
>
>
> > Euro plate brackets were never made for USA style bumpers
> > afaik. No reason to have done so. Two completely different
> > bumper designs. Few if any USA front bumpers in Europe. In
> > fact, if memory serves, no bracket is required to mount a
> > European plate to a Euro front bumper as it has a built-in
> > mount pocket for that purpose.
> >
> > DeWitt Harrison
> > '88 5kcstq
> >
> > On Fri, 20 Jun 2003 17:30:55 EDT, JordanVw at aol.com wrote:
> >
> > > hard to believe nobody knows where to get one of these things.. didnt
> all
> > > countries in europe have front plates?
> > > nobody from europe on this list?
> > >
> > > ------------------snip------------------
> > > wanted:  type44 european front liscence plate mount.   this is the
> slender
> > > long mount not the short rectangular north american one.
> > >
> > > let me know if you have one or know where one is.
> > > thanks
> > >chris
> >
>
>