WANTED: TYPE44 EURO FRONT LISCENCE PLATE MOUNT

[Tom Nestor]

I believe you will find the one exception to that is the 200 20v
turbo......same front bumper on both sides of the pond to accomodate the
large tubing to the inlet side of the single pass intercooler.

Tom Nestor


From: "DeWitt Harrison" <Six-Rs at attbi.com>
To: <JordanVw at aol.com>
Cc: "Quattro List" <quattro at audifans.com>
Sent: Saturday, June 21, 2003 1:29 PM
Subject: Re: WANTED: TYPE44 EURO FRONT LISCENCE PLATE MOUNT


> Euro plate brackets were never made for USA style bumpers
> afaik. No reason to have done so. Two completely different
> bumper designs. Few if any USA front bumpers in Europe. In
> fact, if memory serves, no bracket is required to mount a
> European plate to a Euro front bumper as it has a built-in
> mount pocket for that purpose.
>
> DeWitt Harrison
> '88 5kcstq
>
> On Fri, 20 Jun 2003 17:30:55 EDT, JordanVw at aol.com wrote:
>
> > hard to believe nobody knows where to get one of these things.. didnt
all
> > countries in europe have front plates?
> > nobody from europe on this list?
> >
> > ------------------snip------------------
> > wanted:  type44 european front liscence plate mount.   this is the
slender
> > long mount not the short rectangular north american one.
> >
> > let me know if you have one or know where one is.
> > thanks
> >chris
>