NG vs 20V

[JShadzi at aol.com]

--
[ Picked text/plain from multipart/alternative ]
You can go to 10psi if you like, you can get about 200hp out of the stock CIS
with this kind of setup.  You don't "need" the 5kt intake, the stock KX will
work fine too, you  just need to come up with some intake plumbing.

Javad

In a message dated 3/2/2003 10:20:46 PM Pacific Standard Time,
edshred2000 at yahoo.com writes:

> Bolt on the turbo and exhaust manifold from an early
> Audi turbo diesel. Also necessary will be a 5000 turbo
> intake manifold. Strictly bolt on. should take a day
> or two (or three) once all the parts are assembled
> (and I've got them all!). Engine will remain in place,
> although such a set up will need a stronger clutch at
> some point
>
> Should be good for 160 hp at a safe 5 psi boost