[V6-12v] Prop shaft repair succesful

[Buchholz, Steven]

Thanks for the positive feedback George!

As far as I am concerned if someone wanted to post it there it would be fine
with me ... given that the authorship was properly attributed.  I would also
be fine if someone used it as a basis for a procedure specifically for your
cars ...

Since the same issue spans multiple Audi platforms it really is unfortunate
that we can't have some general repository for the storage of tech
procedures ... so many people have created their own ... but then you need
to know where to look to find them.  The model I'm thinking of is the one
under the tech section on the IBMWR site:

	http://www.ibmwr.net/ktech.shtml

Given the number of people who participate in this forum I must say I
continue to be dumbfounded as to why we can't put something like this
together ...

Steve Buchholz
San Jose, CA (USA)
 >
 >  That was a very nice write up for the repair procedure. You
 >  should send it
 >  to the 12v org and see if it can be included in the repairs section.
 >
 >  George
 >