More ?? on 9007 vs 9004 bulbs

[duandcc_forums at cox.net]

OK, can anybody confirm which wires? I am thinking cut the red & the black wires and cross them (splice the red into the black, and black into the red). That would reverse the postion of the low+ and the ground. Does that make sense?

Dave


>
> From: "Perry, Christoper (EDS)" <chris.perry at weyerhaeuser.com>
> Date: 2003/03/05 Wed PM 03:59:24 EST
> To: "'duandcc_forums at cox.net'" <duandcc_forums at cox.net>,
> 	quattro at audifans.com
> Subject: RE: More ?? on 9007 vs 9004 bulbs
>
> I remember that you had to switch two of the wires in the harness to make it
> work properly.
>
> Chris Perry
>
> -----Original Message-----
> From: duandcc_forums at cox.net [mailto:duandcc_forums at cox.net]
> Sent: Wednesday, March 05, 2003 12:40 PM
> To: quattro at audifans.com
> Subject: More ?? on 9007 vs 9004 bulbs
>
>
> I just wanted to double check something. 9004 and 9007 bulbs use the same
> wiring, right? I think I read in a past thread that the only change you
> would have to make is bending a metal tab on the headlight or making some
> sort of mod on the bulb, but no wiring changes. Positive low, positive high
> and ground are in the same places for both 9004 and 9007....right? Or was I
> too far into my six pack when I read that?
>
> Dave
> 1987 CGT Special Build
> SE Virginia
>