Trans filler method

[Nick Lawrence]

This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
I recently changed my trans axle fluid and this is how I refilled:
    I used a 1/2" copper tube about 3' long , (available from hardware store in 10' coil, give the rest to a friend).
Bend one end to a gradual 90 degree, not tight enough to kink.
Attach a funnel to the other end with a short length of rubber hose.
Standing in front of the car poke the curved end down just in front of the master cylinder, you may have to guide it from below to insert in the hole.