no air thru dash vents?

[Kneale Brownson]

Dash vents don't supply blower air if you're in "auto" setting, I don't
believe.  At least they don't on my 200q20v.  Only "bilevel" and "econ"
send air to the dash vents.  Have you also made sure to reconnect the air
plumbing inside the car after reinstalling the heater core box?

At 03:39 PM 03/29/2003 -0500, scott thomas wrote:
>I just finished doing my heater core and blower motor r&r on my
>200q. Job went well and quick, except for the fact that I can't get
>any air from the dash vents anymore. Only from the windshield.
>
>Here's the list of facts:
>The box did go back together ok, and I did check for the movement of
>all of the flaps controlled by the motor. They move. I have checked
>the pass side vacuum servo. I really can't get my fingers well
>enough in there to actuate the linkage. The drivers side servo has a
>couple of peculiarities: one-the black vac line leading to it was
>broken, don't know for how long, but there was no evidence it was
>done now. Next, I checked it for motion while visually inspecting
>the flap it controls through the 90 degree duct next to it. The
>range of motion appears to be limited. The servo doesn't appear to
>go through it whole travel and the flap doesn't seat and close the
>duct all of the way.
>
>I hope all of this info is helpful in getting some kind of
>diagnosis. I wonder if I have to take everything out again to reset
>the flaps? Which flap controls wether the air comes through the dash
>or the windshield? Any help in this is appeciated.
>
>Thanks
>
>The Official Dream Theater Site - http://www.dreamtheater.net/
>___________________________________________________________
>Get your own Web-based E-mail Service at http://www.zzn.com