20vt Header

[Martin Pajak]

Richard,

Yes, the intent was for it to directly replace the stock unit with the
exception of better flow.
It should flow even better than the RS2 unit.

This is going to be a tubular unit.
The collector will not be hard to make because I have a model of each of the
tubes, bends and cut angles.
All you then need is a jig to hold it all together and weld.
The jig will also be easy to make because I can use the stock manifold to
make one.

Thanks for comments.

BTW we have a member of our club with a 1973 100LS 2door... it's in showroom
condition... way cool!

Cheers
Martin Pajak

http://www.quattro.ca

1983 Audi Ur-quattro (289,000 km) Canadian spec. winter car
1985 Audi Ur-quattro (166,000 km) Euro spec. import ;o)



> -----Original Message-----
> From: Richard Hoffman [mailto:billzcat1 at hotmail.com]
> Sent: May 8, 2003 21:23
> To: Martin Pajak; Quattro List
> Subject: Re: 20vt Header
>
>
> I notice a striking similarity in design to the stock 20v turbo manifold.
> Was this intentional?  Also, how much gain can be expected when the design
> is so similar?  By no means am I an expert!  Also, it looks like that
> collector might be rather difficult to fabricate.
> Is this going to be a cast iron piece or a welded tubular manifold?
> Kudos to the CAD work, truly a beautifully rendered piece!
> Merry Motoring!
> Richard
> 1990 CQ 219K
> 1970 100LS 2-dr 46k
> ----- Original Message -----
> From: "Martin Pajak" <martin at quattro.ca>
> To: "W-T_Audifans" <w-t_audifans at yahoogroups.com>; "Urq"
> <urq at audifans.com>;
> "'SOS-cars'" <SOS-cars at yahoogroups.com>; "S2central"
> <S2central at yahoogroups.com>; "Quattro List" <quattro at audifans.com>;
> "Audi20V_Kruemmer" <Audi20V_Kruemmer at yahoogroups.com>; "200q20v"
> <200q20v at audifans.com>
> Sent: Thursday, May 08, 2003 4:25 PM
> Subject: 20vt Header
>
>
> > This is a multi-part message in MIME format.
> > --
> > [ Picked text/plain from multipart/alternative ]
> > Guys,
> >
> > Just wondering how many would be interested in my 20vt header.
> > Pics of the model are below.  Now I just have to find someone
> to build it.
> > This is designed to replace the stock manifold directly with no need for
> > custom downpipe and custom turbo oil and water pipes.
> >
> > Constructive critisism is most welcome.
> >
> > http://www.quattro.ca/Header.html
> >
> > Thanks
> > Martin Pajak
> > http://www.quattro.ca
> >
> > 1983 Audi Ur-quattro (289,000 km) Canadian spec. winter car
> > 1985 Audi Ur-quattro (166,000 km) Euro spec. import ;o)
> >
> >
> > --
> >
> >
>