Windage duplicity

[Ameer Antar]

Do you have the part # for the urS4 tray? My FA is US only. What's the difference between that and the one for the Coupe Quattro (054-103-634-A)? Will both fit a KH/MC motor? (The KH and MC use the same pan.) TIA.
-Ameer

---Original Message---
From: quattro-request at audifans.com
Date: 9/13/03 4:43:23 AM
Subject: quattro digest, Vol 1 #5370 - 16 msgs

Date: Sat, 13 Sep 2003 00:07:12 -0700 (PDT)
From: Todd Phenneger <tquattroguy at yahoo.com>
Subject: Re: Windage duplicity
To: santoli9 at cox.net, "Quattro List (E-mail)" <quattro at audifans.com>

Call a dealership and order a tray for an ur-S4 1992-1996.  I
have one on my 4ktq and it works great.  Full metal and cost
only about $36 from the dealer.
l8r
  TOdd

--- Stephen Santoliquido <santoli9 at cox.net> wrote:
> O.K. I'm still collecting parts to re-assemble my CGT engine
> (NG), and I
> decide to add a windage tray. I go to FA and find this part
> number for a '91
> Coupe Q: 034 103 163. and the picture looks very much like
> this:
>
http://www.humanspeakers.com/cgi-bin/audi_img.pl?image=windage1.jpg&desc=The
>
%2020V%20windage%20tray%20(034%20103%20623%20A)%20shown%20with%20my%20freshl
> y%20painted%20oil%20pan (thanks Huw).
> Which is what I want.
> So I order one from IMPEX and get this:
> http://members.cox.net/stephensantoliquido/
> But before I call IMPEX to rant I notice that it has the
> correct part # on
> it. And I soon locate a picture of it in FA ('91 90Q) with,
> again, the exact
> same part number (no letter suffix). WTH???
> In FA it appears to mount under the crank somehow, presumably
> to serve the
> same function. But:
> 1) I can't figure out how the heck it should mount. And:
> 2) I can't see that it would be as effective as the metal one
> that runs the
> length of the crank.
> Any thoughts? BTDT? Know how I can get the right one?
> TIA
> Steve
>
>


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

--__--__--