Windage duplicity

[Todd Phenneger]

Yes,
  They it will fit a KH or MC.  And it the same unit that is in
Huw's Picture on his website.  I dont have the PN Handy but I
think its the one that HUW posted in his last E-mail.  Look back
a day to Huw's reply.
Good Luck
  Todd

--- Ameer Antar <antar at comcast.net> wrote:
> Do you have the part # for the urS4 tray? My FA is US only.
> What's the difference between that and the one for the Coupe
> Quattro (054-103-634-A)? Will both fit a KH/MC motor? (The KH
> and MC use the same pan.) TIA.
> -Ameer
>
> ---Original Message---
> From: quattro-request at audifans.com
> Date: 9/13/03 4:43:23 AM
> Subject: quattro digest, Vol 1 #5370 - 16 msgs
>
> Date: Sat, 13 Sep 2003 00:07:12 -0700 (PDT)
> From: Todd Phenneger <tquattroguy at yahoo.com>
> Subject: Re: Windage duplicity
> To: santoli9 at cox.net, "Quattro List (E-mail)"
> <quattro at audifans.com>
>
> Call a dealership and order a tray for an ur-S4 1992-1996.  I
> have one on my 4ktq and it works great.  Full metal and cost
> only about $36 from the dealer.
> l8r
>   TOdd
>
> --- Stephen Santoliquido <santoli9 at cox.net> wrote:
> > O.K. I'm still collecting parts to re-assemble my CGT engine
> > (NG), and I
> > decide to add a windage tray. I go to FA and find this part
> > number for a '91
> > Coupe Q: 034 103 163. and the picture looks very much like
> > this:
> >
>
http://www.humanspeakers.com/cgi-bin/audi_img.pl?image=windage1.jpg&desc=The
> >
>
%2020V%20windage%20tray%20(034%20103%20623%20A)%20shown%20with%20my%20freshl
> > y%20painted%20oil%20pan (thanks Huw).
> > Which is what I want.
> > So I order one from IMPEX and get this:
> > http://members.cox.net/stephensantoliquido/
> > But before I call IMPEX to rant I notice that it has the
> > correct part # on
> > it. And I soon locate a picture of it in FA ('91 90Q) with,
> > again, the exact
> > same part number (no letter suffix). WTH???
> > In FA it appears to mount under the crank somehow,
> presumably
> > to serve the
> > same function. But:
> > 1) I can't figure out how the heck it should mount. And:
> > 2) I can't see that it would be as effective as the metal
> one
> > that runs the
> > length of the crank.
> > Any thoughts? BTDT? Know how I can get the right one?
> > TIA
> > Steve
> >
> >
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design
> software
> http://sitebuilder.yahoo.com
>
> --__--__--
>


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com