Injector mounting in manifold.

[Alan Pritchard]

That piece of hardware looks like you would be able to machine an additional
couple of holes to bolt into the cs location, maybe with a bit of
"trimming", and for 65 dollars it would be hard to make anything cheaper!!!

 -----Original Message-----
From: 	Ben Swann [mailto:benswann at comcast.net] 
Sent:	07 April 2004 15:28
To:	Jim Green
Cc:	Quattro list; apritchard at seaeye.com; JShadzi at aol.com
Subject:	Re: Injector mounting in manifold.

That is sort of the idea.  Would be nice if it had the flange like CS
injector, but I may be ablet to fabricate something - just need a retainer
that slips over the injector so the screws can hold it down.

Ben
----- Original Message ----- 
From: "Jim Green" <jeg1976 at yahoo.com>
To: "Ben Swann" <benswann at comcast.net>
Cc: "Quattro list" <quattro at audifans.com>; <apritchard at seaeye.com>;
<JShadzi at aol.com>
Sent: Wednesday, April 07, 2004 10:11 AM
Subject: Re: Injector mounting in manifold.


>
> --- Ben Swann <benswann at comcast.net> wrote:
> > I'm following up on thest questions.
> >
> > I'm toying with putting a cold start injector in the
> > place where the air
> > temp sensor is and using the boss in the manifold
> > for the air temp sensor.
> > It seems that this should work fine, as the boss was
> > used for the temp
> > sensor on earlier cars.
> >
> > So questions are:
> >
> > 1)  Will the inlet air temp sensor should work fine
> > if located in the boss
> > on the manifold just past the throttle body?
> >
> > 2)  Will a cold start injector work fine as a
> > supplementary injector, or
> > should I procure an alternate injector?  What
> > alternative can be used if
> > need be - it would be nice to find one that fits the
> > mounting of the CS
> > injector.
>
> I'm not sure the cold start injector was designed to
> be pulsed at a high speed, and I'm not sure if the
> resistance is right.  I'd use something like this.
>
http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-
FUL-013&Category_Code=FUL
>
>
>
> =====
> Jim Green
> '89 90tq
> '89 80q
> http://www.mswanson.com/~jgreen/car_home.html
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Small Business $15K Web Design Giveaway
> http://promotions.yahoo.com/design_giveaway/