PN for Cruise control pushrod grommet (the one that always breaks)- 1988 A100?

Kneale Brownson knotnook at traverse.com
Wed Apr 21 20:14:41 EDT 2004


When I tried to get one of those grommets for my 200q20v, it only was
listed as available as an assembly including the connecting rod.  I presume
it was the same for earlier I5 engines.  However, it IS available
separately as a V8 part.  The part number is 811 907 423 and it's called a
bushing for the connecting rod.

At 12:12 AM 4/22/2004 +0100, rob hod wrote:
> Hi listers,
>    Subject line says it all I guess, - my CC failed at the start of a long
>trip today, dangit. Serves me right for engaging it whilst 'travelling'
>somewhat, "you want me to keep this up all day?". Further on in the trip I
>guessed it may be the grommet so I stopped and had a look, - sure enough the
>loaded side had ripped off.
>
>  However I was able to pull the remaining side over the servo forks, which
>I admit gave me a steady idle of around 1200rpm but allowed cruise control
>for the next 350 odd miles.
>
> Guess I'd better get another grommet though. Patient is the "The old
>'hoss" - 1988 100 I5, with RT engine. Anyone got a part number handy ?
>
> Thanks
>
>    Rob.
>
>
>rob
>
>_______________________________________________
>quattro mailing list
>quattro at audifans.com
>http://www.audifans.com/mailman/listinfo/quattro



More information about the quattro mailing list