PN for Cruise control pushrod grommet (the one that always breaks)- 1988 A100?

[rob hod]

  Good stuff!,

    Thanks,

rob
----- Original Message -----
From: "Kneale Brownson" <knotnook at traverse.com>
To: "rob hod" <rob3 at hod3.fsnet.co.uk>; <quattro at audifans.com>
Sent: Thursday, April 22, 2004 1:15 AM
Subject: *** SPAM *** Re: PN for Cruise control pushrod grommet (the one
that always breaks)- 1988 A100?


> When I tried to get one of those grommets for my 200q20v, it only was
> listed as available as an assembly including the connecting rod.  I
presume
> it was the same for earlier I5 engines.  However, it IS available
> separately as a V8 part.  The part number is 811 907 423 and it's called a
> bushing for the connecting rod.
>
> At 12:12 AM 4/22/2004 +0100, rob hod wrote:
> > Hi listers,
> >    Subject line says it all I guess, - my CC failed at the start of a
long
> >trip today, dangit. Serves me right for engaging it whilst 'travelling'
> >somewhat, "you want me to keep this up all day?". Further on in the trip
I
> >guessed it may be the grommet so I stopped and had a look, - sure enough
the
> >loaded side had ripped off.
> >
> >  However I was able to pull the remaining side over the servo forks,
which
> >I admit gave me a steady idle of around 1200rpm but allowed cruise
control
> >for the next 350 odd miles.
> >
> > Guess I'd better get another grommet though. Patient is the "The old
> >'hoss" - 1988 100 I5, with RT engine. Anyone got a part number handy ?
> >
> > Thanks
> >
> >    Rob.
> >
> >
> >rob
> >
> >_______________________________________________
> >quattro mailing list
> >quattro at audifans.com
> >http://www.audifans.com/mailman/listinfo/quattro
>