Wheel stud kit?

[Hoffman Anthony J A1C 552 CMS/MXMVC]

I believe you can use the tool Audi currently includes with their new cars.
It is threaded on one end, and smooth the rest of the way. It screws in to
the hub, then you put the wheel on and put two or three bolts in and remove
the "guide". Makes life simpler.

Tony Hoffman

-----Original Message-----
From: Richard J Lebens [mailto:rick-l at rocketmail.com] 
Sent: 29-Apr-2004 3:02 PM
To: Brett Dikeman; Richard Hoffman; msuffern at lycos.com; quattro at audifans.com
Subject: Re: Wheel stud kit?


Because you can put the wheel on without the rotor turning. You can see the
studs through the holes.  Its much easier to get the threads of a nut
aligned with the fixed stud than the bolt aligned with the hole aligned with
the hub in line with the rotor and wheel.


--- Brett Dikeman <brett at cloud9.net> wrote:
> At 1:40 PM -0700 4/28/04, Richard Hoffman wrote:
> 
> >Wheel bolts suck.  Once you go to studs you will never go back :)
> 
> For the unenlightened, mind telling us why?
> 
> B
> --
> "They that give up essential liberty to obtain temporary
> safety deserve neither liberty nor safety." - Ben Franklin
> http://www.users.cloud9.net/~brett/
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro



	
		
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs  
http://hotjobs.sweepstakes.yahoo.com/careermakeover 
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro