Weird Window Switch Issue

[Hoffman Anthony J A1C 552 CMS/MXMVC]

First, both of the switches have to be in and connected for it to work. They
rely on contacts inside the other for power and ground. If the jumper's
work, it's some type of power delivery problem.

Tony Hoffman

-----Original Message-----
From: quattro-bounces at audifans.com
[mailto:quattro-bounces at audifans.com]On Behalf Of Archibald, Jon
Sent: Monday, August 02, 2004 12:24 PM
To: quattro at audifans.com
Subject: Weird Window Switch Issue


Patient: '86 5kcsq
Symptom: LF window goes down, will not go back up.

The first thing I did was swap out a few "known good" switches and clean
both the male and female connectors to the switch, no change in the
condition. What's weird is using 2 "jumper wires" I can drive the window
up and down with no problem by bridging the connections directly on the
switch harness. Seems like it points to the switch, but no other
switches work. What gives? Anybody been here?

TIA,
Jon
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro