"Small" part info request for T85

Louis-Alain_Richard at computerhorizons.com Louis-Alain_Richard at computerhorizons.com
Tue Aug 10 09:55:48 EDT 2004


Tony is right: this canister is there for the operation of the vacuum 
operated diffs. 
See diagram 62-00, main group 7, sub-group 11 for the correct sized 
fastener:
(ST4, 8x19 sheetmetal screw N 013 975 5)

Louis-Alain






Hoffman Anthony J A1C 552 CMS/MXMVC <Anthony.Hoffman at tinker.af.mil> 
Sent by: 
quattro-bounces+louis-alain_richard=computerhorizons.com at audifans.com
2004-08-10 07:35

To
"'Doug Johnson'" <ur-quattro at msn.com>
cc
"'quattro at audifans.com'" <quattro at audifans.com>
Subject
RE: "Small" part info request for T85






It is a vacuum canister, for even operation of vacuum operated things 
under
wide open throttle (0 vacuum). I'll check tonight for the size of the 
screw.

Tony Hoffman

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] 
On
Behalf Of Doug Johnson
Sent: 09-Aug-2004 9:19 PM
To: 'Q-List'
Subject: "Small" part info request for T85


On my '86 4kcsq, down below the antenna in the fender area, there's a 
green
plastic canister mounted in a vertical position........with no securing
screw.  The top anchor is a press-fit "knob," but the screw at the bottom 
is
missing.  I can't find the canister in FP, but could someone please tell 
me
a size for that screw, and is it backed up by a flat and/or a clocking
washer?  Also, what's the canister......is it related to the fuel system?

TIA,

~ Doug




More information about the quattro mailing list