"Small" part info request for T85

[Doug Johnson]

Thank you, Tony,

FP shows it as a "tapping" screw, so I'm okay without the size.
Thanks also to Louis-Alain and to Marques (off-list).

Regards,

~ Doug
 

> -----Original Message-----
> From: Hoffman Anthony J A1C 552 CMS/MXMVC 
> [mailto:Anthony.Hoffman at tinker.af.mil] 
> Sent: Tuesday, August 10, 2004 4:36 AM
> To: 'Doug Johnson'
> Cc: 'quattro at audifans.com'
> Subject: RE: "Small" part info request for T85
> 
> It is a vacuum canister, for even operation of vacuum 
> operated things under wide open throttle (0 vacuum). I'll 
> check tonight for the size of the screw.
> 
> Tony Hoffman
> 
> -----Original Message-----
> From: quattro-bounces at audifans.com 
> [mailto:quattro-bounces at audifans.com] On Behalf Of Doug Johnson
> Sent: 09-Aug-2004 9:19 PM
> To: 'Q-List'
> Subject: "Small" part info request for T85
> 
> 
> On my '86 4kcsq, down below the antenna in the fender area, 
> there's a green plastic canister mounted in a vertical 
> position........with no securing screw.  The top anchor is a 
> press-fit "knob," but the screw at the bottom is missing.  I 
> can't find the canister in FP, but could someone please tell 
> me a size for that screw, and is it backed up by a flat 
> and/or a clocking washer?  Also, what's the canister......is 
> it related to the fuel system?
> 
> TIA,
> 
> ~ Doug
> 
> 
> _______________________________________________
> quattro mailing list
> quattro at audifans.com http://www.audifans.com/mailman/listinfo/quattro
>