timing marks on the block ,,, where ?

[Denis]

    ----- Original Message ----- 
    From: SJ 
    To: Denis 
    Sent: Thursday, December 23, 2004 11:03 PM
    Subject: Re: timing marks on the block ,,, where ?




    ----- Original Message ----- 
    From: "Denis" <sparkplugvw at hotmail.com>
    To: "SJ" <syljay at optonline.net>; <quattro at audifans.com>
    Sent: Thursday, December 23, 2004 9:22 PM
    Subject: timing marks on the block ,,, where ?


      I m putting back the timing belt at the real marks,,, after it skipped 2
    maybe 3 teeth..

      The timing mark on the cam pulley is a little point that align to the
    metal sheet on the head,,, notch.
    **** The mark is a dimple in the back of the cam sprocket(its not a pulley). wrong world, i see
    The mark should line up with the GASKET that is underneath the valve cover. i used the 4 mm mark on the metal sheet beside the cam sprocket.  i used the sprocket mark aligned to the center of the 4mm mark. I think the mark is 1 tooth retarded.

      The timing mark on the crank pulley is one line BUT wht is the timing mark
    on the block ???
    ****That straight edge inside the sight hole. Metal edge.
    I'll try taking a pix of it and send it to you.
    I used the water pump mark as Humanspeaker mentionned.

      thanks all

      Ðenis