timing marks made the engine knocking

[Denis]

  I just tried to put all mark on the pix.
  I cant get to the cam mark. It goes lower than the lower edge of the head gasket or higher than the edge of the gasket witch is exactly at the mark on the metal sheet in front of the engine.

  I made couple turn to check if anything is touching. Was ok, the valves dont touched pistons.
  I crancked the engine, but i did only one try, just to try if anything is still ok.
  And the engine did not like it, it knock alot on the first turn...... too much advance and seems valves touched pistons a little.

  So i ll put back at the mark that was before.

  engine:     2.3 NA 
  car:         100Q 1989
  injection:    CSI-3
  Ðenis