quattro Digest, Vol 14, Issue 103

[SJ]

> From: "Denis" <sparkplugvw at hotmail.com>
> Subject: Re: Timing belt align to rotor problem.
>
>   I m searching about the sparkplug wiring location on the cap...
**** You dont need no wiring locations. Its very simple to figure out.
If firing order is 12453 :

1. Remove dist cap
2. Note the rotation of the engine when running or cranking. Look at the
dist rotor and note which way it turns. Mark the cap on the outside with an
arrow showing rotor rotation direction.
3. Line up engine marks for TDC on #1 cylinder.
4. Dist Rotor will be pointing toward and making contact with #1 sparkplug
wire contact inside the dist cap. Mark this wire post on the outside of cap
with magic marker as "1"
5. Using your previous arrow on the dist cap, the next sparkplug wire post
in the direction of rotation will be #2, the next  in line is #4, the next
is #5, and the last is #3

Easy huh?

SJ
85 Dodge PU, D-250, 318, auto
85 Audi 4k - - sold but still on the road
88 Audi 5kq
90 Audi 100q