How do you hook up the fresh air flap spring to the diaphram? 885KCST

[Brett Goetz]

Since I've owned my 88 Audi 5KCST, I have never had the fresh air flap 
work correctly.  Now that I have a new spring, I would like to install 
it, but I don't know how it hooks up to the diaphragm.  I looked at the 
factory manual, the Haynes manual and stared at it for a while.  I still 
cannot figure it out.  One end goes to the door, but the other end; does 
that connect to the diaphragm?  If it does, is there a hook at the end 
of the diaphragm that I'm missing? What about the metal piece with the 
slot cut in it? Does the spring go through it?


______________________________________________________________________
This email transmission and any documents, files or previous email 
messages attached to it may contain information that is confidential or 
legally privileged. If you are not the intended recipient or a person 
responsible for delivering this transmission to the intended recipient, 
you are hereby notified that you must not read this transmission and 
that any disclosure, copying, printing, distribution or use of this 
transmission is strictly prohibited. If you have received this 
transmission in error, please immediately notify the sender by telephone 
or return email and delete the original transmission and its attachments 
without reading or saving in any manner.