4x100 hubs and strut housings for 4kq

[Richard Hoffman]

One could always have a machinist re-drill the 4x108mm hubs to 4x100mm and
you would have a uni-lug hub.  Just a thought!  If the holes were offset 45
degrees from the original holes, I can't imagine that there would be any
strength issues since there will still be plenty of material left.

Quantum Syncro hubs won't work all around - they have different rear
suspension, although the fronts would work.

HTH
Richard
----- Original Message ----- 
From: "Brady Moffatt" <bradym at sympatico.ca>
To: <Stpndsmnn at aol.com>; <Quattro at audifans.com>
Sent: Tuesday, January 13, 2004 7:26 AM
Subject: RE: 4x100 hubs and strut housings for 4kq


> No 4kq had 4x100. Quantum Syncro, sure, but not 4kq.
>
> Cheers,
> Brady
>
> -----Original Message-----
> From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com]On
> Behalf Of Stpndsmnn at aol.com
> Hi,
>
> I'm looking for 4x100 hubs and strut housings from an early 4kq.  I want
to
> convert my 85 back to the older stylr hub so I can use a set of wheels and
> brakes that I have.  Please let me know if you have some you'd like to
sell
> or
> know of some some place
>
> TIA
> Matt Kramer
>
>
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>