ring align Re: speaking of 4X108 wheels..
Denis
sparkplugvw at hotmail.com
Wed Jan 14 10:02:33 EST 2004
I have 16 inchs wheel on my 100Q they are 5 branches factory Audi and they
have aluminium ring to align center.
Denis
----- Original Message -----
From: Dave Glubrecht <daveglu at hotmail.com>
To: tihol tiholov <tihol.tiholov at sd27.bc.ca>; <quattro at audifans.com>
Sent: Wednesday, January 14, 2004 12:43 AM
Subject: Re: speaking of 4X108 wheels..
> I will never again run wheels that are not hub centering. However the
> solution is easy, just have a spacer ring made. Many aftermarket wheels
are
> large to fit different wheels and they sell centering rings to fit your
> vehicle.
> Dave G
>
>
>
> ----- Original Message -----
> From: "tihol tiholov" <tihol.tiholov at sd27.bc.ca>
> To: <quattro at audifans.com>
> Sent: Tuesday, January 13, 2004 1:49 PM
> Subject: Re: speaking of 4X108 wheels..
>
>
> >anyone know if the 4x108 ford wheels will work on the audis [given
similar
> width + offset]? ive been looking for a CHEAP set of 16's for my 90 and
ive
> seen focus take offs selling cheap.
>
> They'll be a little loose on the hub - bore is 63.3 mm on Ford vs. 57 mm
on
> Audi, offset seems OK, even a little racy - up to 38 mm
>
> TT
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>
More information about the quattro
mailing list