pressure transducer pinout

[Kurt W. Deschler]

There is a picture of the pressure transducer at SJM's site:
http://www.sjmautotechnik.com/pinout.html#pressen

1: Out
2: +5V
19: Gnd

The text implies that it is a linear transducer with output voltage up
to 4.95V.

The GM 3 bar sensors (89 Turbo TA #16040749) have a .5 to 4.9V output
range - Anyone using one of these?. Should be around $70. See this link:
http://hhscott.com/93tmv/3-bar_map.htm

	-Kurt
	'87 5kcstq

> Message: 8
> Date: Thu, 15 Jan 2004 01:43:32 -0500
> From: "Ben Swann" <benswann at comcast.net>
> Subject: pressure transducer pinout.
> To: <quattro at audifans.com>, <200q20v at audifans.com>
> Cc: Ben Swann <benswann at comcast.net>
> Message-ID: <177301c3db32$e4942e30$6401a8c0 at SWANSONG>
> Content-Type: text/plain;	charset="iso-8859-1"
>
> Does anyone know the pinout ( which pins are Vs Vout and Gnd) for the
> Bosch pressure transducers found in Motronic ECU's.  Diagram, schematic
> or picture showing this would be helpful.
>
> Ben