pressure transducer pinout

[Kurt W. Deschler]

Here is the updated 3 bar map sensor and connector part#s:

http://www.gmpartsdirect.com/
#12223861 3 bar map sensor $51.31
#15305891 Connector $17.52

On Sat, 17 Jan 2004, Kurt W. Deschler wrote:

> There is a picture of the pressure transducer at SJM's site:
> http://www.sjmautotechnik.com/pinout.html#pressen
>
> 1: Out
> 2: +5V
> 19: Gnd
>
> The text implies that it is a linear transducer with output voltage up
> to 4.95V.
>
> The GM 3 bar sensors (89 Turbo TA #16040749) have a .5 to 4.9V output
> range - Anyone using one of these?. Should be around $70. See this link:
> http://hhscott.com/93tmv/3-bar_map.htm
>
> 	-Kurt
> 	'87 5kcstq
>
> > Message: 8
> > Date: Thu, 15 Jan 2004 01:43:32 -0500
> > From: "Ben Swann" <benswann at comcast.net>
> > Subject: pressure transducer pinout.
> > To: <quattro at audifans.com>, <200q20v at audifans.com>
> > Cc: Ben Swann <benswann at comcast.net>
> > Message-ID: <177301c3db32$e4942e30$6401a8c0 at SWANSONG>
> > Content-Type: text/plain;	charset="iso-8859-1"
> >
> > Does anyone know the pinout ( which pins are Vs Vout and Gnd) for the
> > Bosch pressure transducers found in Motronic ECU's.  Diagram, schematic
> > or picture showing this would be helpful.
> >
> > Ben
>