4kq engine bracket hardware

[auditude at cox.net]

Hi Brady and list,

Thanks for the replies.  Hmm... I replaced them with whatever part number shows as the 
correct one, at least according to TPC's website.  While I assumed they were hydraulic, they 
may not be.  I didn't realize the original ones weren't.

I put my 3B motor in the bay last night, and the turbo is way close to the mounting tab for 
the original airbox.  I think even with the spacers in place it might still be close tho'.

If anyone who's done such a swap knows whether I should cut the tab off or not, please let 
me know.  I would prefer not to cut anything I don't need to, at least until it comes time to 
put in a monster FMIC.

Thanks,

Ken

I'll check this out.

On 17 Jan 2004 at 13:59, Brady Moffatt wrote:

> Yes, but if you replace the mount with the hydraulic ones (good idea) you
> don't need the spacers.
> 
> Cheers,
> Brady
> Urq, 4kq, Z
> 
> -----Original Message-----
> From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com]On
> Behalf Of auditude at cox.net
> 
> Hi,
> 
> I have a quick question for anyone who would know.
> 
> Does a 4kq have those thick metal washers in between the motor mount and the
> engine
> brackets?
> 
> Thanks,
> 
> Ken
> 
>